
Butte Roofing replaces residential roofs in Magalia and Paradise Pines with Class A assemblies built for the upper Ridge — standing-seam metal and fire-rated shingle over ice-and-water membrane, ember-resistant vents, snow retention where it is needed — with the Butte County permit handled and a 5-year workmanship warranty. In-house crews from Chico, 35 minutes down the Skyway.
Magalia sits higher, wetter and more wooded than Paradise, and its roofs show it: more snow, more pine needles, more shade holding moisture on north slopes, and steep lots that make access part of the job. We have re-roofed the upper Ridge for decades and we plan every Magalia replacement around those four things.
Want a ballpark before we visit? Our instant quote tool prices a Magalia roof from satellite measurements in about a minute.
Instant roof quoteMagalia's elevation runs from roughly 2,300 feet at the lower end to well over 2,500 feet toward Paradise Pines and the upper Skyway, and that is enough to change how a roof has to be built.
Wet, heavy snow falls several times most winters and sits on north-facing slopes for days; freeze-thaw cycles open any lap, seam or nail hole that was marginal; and snow melt running under shingles at the eaves is the leading cause of the ceiling stains we see up here. Every Magalia re-roof gets ice-and-water membrane at the eaves and valleys as standard, not as an upgrade.
On metal roofs we add snow retention above doorways, decks and walkways so a sheet of ice does not release onto someone. Ventilation matters too: a poorly vented attic under snow melts it unevenly and builds ice dams at the eaves.
The ponderosa and sugar pines that make Magalia beautiful drop needles year-round, and needles are the enemy of a roof on the Ridge. They fill valleys, clog gutters, hold moisture against shingles in the shade and — most importantly after the Camp Fire — collect as ember-catching fuel at exactly the places a fire finds first.
Magalia is in a Very High Fire Hazard Severity Zone, so every replacement roof must be a Class A assembly under Chapter 7A, with ember-resistant vents, protected eaves and non-combustible edges. Standing-seam metal is the natural choice here because it sheds needles and snow and is Class A by itself; fire-rated shingle over the right underlayment is the affordable alternative.
Either way, we design valleys and gutters to be cleared quickly, because a Magalia roof will need clearing several times a year.
A large share of Magalia's homes are inside Paradise Pines, whose property owners association has architectural guidelines that can affect roof color and material. We know the process and bring the samples and product data the review needs so the roof is not delayed.
Beyond the association, Magalia's housing ranges from 1970s and 1980s cabins and ranch homes on steep wooded lots to newer homes rebuilt after the fire on the lower Ridge. Many of the older homes carry original or second-generation composition roofs, and some still have wood shakes that cannot be replaced in kind.
Access is a real factor on steep lots with long driveways and tight tree cover; we plan material staging and dumpster placement so the trees, the driveway and the septic system are protected.
Magalia is unincorporated, so the permit comes from Butte County, which reviews the Class A assembly and the WUI details; we pull it, supply the documentation and meet the inspector. We schedule Magalia re-roofs for the dry season where we can and watch the forecast closely in the shoulder months, because we do not open a roof with snow or rain coming.
Most homes take three to five days, with metal and steep or complex roofs at the longer end. Our crews are Butte Roofing employees, the same foreman runs the job start to finish, and every roof leaves with the manufacturer warranty and our 5-year workmanship warranty — plus the documentation many insurers now require for a Ridge home.
Yes. At 2,300 to 2,600 feet, Magalia gets wet snow several times most winters, and freeze-thaw at the eaves is the main cause of leaks we see. We install ice-and-water membrane at eaves and valleys on every re-roof and add snow retention on metal roofs above walkways.
A Class A assembly under Chapter 7A of the California Building Code — the Wildland-Urban Interface standard — with ember-resistant vents, protected eaves and non-combustible edges. Wood shakes cannot be replaced in kind.
The property owners association has architectural guidelines that can cover roofing color and material. We supply the samples and product data for the review so the approval does not hold up the job.
Metal sheds snow and pine needles better and lasts longer, so it is our first recommendation on the upper Ridge. Fire-rated architectural shingle is the more affordable Class A option and works well with proper ventilation and a needle-clearing routine.
Butte County, since Magalia is unincorporated. We pull the permit, supply the Class A assembly documentation and meet the inspector.
Yes. We plan staging and dumpster placement for Ridge lots, protect the driveway and septic area, and carry material by hand where a truck cannot go.

Free estimates. Honest answers. Here when you need us.